Replacement Locks For Patio Doors at Lowe's
Replacing the patio door lock is a straightforward and effective method to improve the security of your home. However the correct installation and regular maintenance is crucial.
In order to successfully replace the lock on your patio door it is essential to know what the type of the lock you have currently is. The size of the screw hole as well as the type of faceplate on the end will assist you in identifying the kind of lock you are replacing.
Identifying Your Lock's Existing Lock
It is essential to know the distinctions between different kinds of locks before you decide to purchase new hardware for your lock. This will enable you to find a replacement that is ideal for your home, and also ensure its safety and security.
The most popular lock is the cylinder lock. It's also referred to as pin-and-tumbler locks. This type of lock makes use of the bottom pins, top pins, and springs in order to keep the key hole and plug secured. Cylinder locks come in a variety of different sizes and it is essential to know the exact dimensions and length of the cylinder you currently have before purchasing the replacement.
To measure the width to determine the width, loosen the screws that hold the cylinder in place and carefully pull it out. Then, you can measure the distance in millimeters between the outer edge and the inside of the cylinder. Compare this number to the measurements of the lock you plan to purchase. This will help ensure that your new lock is the correct size and will fit in the existing door lock hole.
Another method to determine the correct size of the lock you have is to test it using keys. If replace lock on upvc door can slide into the cylinder without difficulty and easily, then it is the size of the rekeying kit that you need. If the key isn't able to slide in, it is likely that your cylinder has an alternative keyway and can't be rekeyed to accept that type of key.
It is recommended to follow the instructions supplied by the manufacturer that come with a rekeying kit. Every kind of lock has its own set of unique installation requirements. It is recommended to to test the new lock after installing it to make sure that it is working correctly and offers the highest level of security. It is also essential to pay attention to any additional features that your new lock may have because they could affect how easy it is to operate.
Measure the Width
A faulty patio door lock can result in serious security issues. It is crucial to examine your locks regularly and replace them if necessary. This will ensure that they are secure and operating correctly, and could aid in preventing issues like a loose latch or keyway. If your current locks are worn out or damaged, you can get replacements at Lowe's which will offer the security you require for your home.
Before you purchase a new patio door lock, it's important to measure the dimensions of your existing one. This will give you a clear idea of the size you should purchase and eliminate the risk of purchasing the wrong lock for your. To do this, you'll need make two measurements that are the length of the backset and the depth of the case. The first measurement is the distance between the edge of the lock's face and that of the middle of the hole that the handle spindle is inserted into. The second is looking at the depth of a lock from the outside.
When choosing the type of lock you want to use, it's important to consider how you will be using your doors. For instance, if you have sliding doors open horizontally, you'll have to select a top and bottom tab lock that connects to the strike plate, preventing the door from being forced or lifted open. If your patio doors are vertically open, you'll have to select a mortise latch with a spring loaded hook latch for extra security.
It is crucial to note the location of the screw holes when determining the size of your lock. Some mortise lock screws will be round and others are square. You'll be able to determine the location of the keyway. Some have a vertical keyway while others are bent at 45 degrees. Take a photo of the lock using your digital camera to ensure that you get the right replacement.
After you've gotten your measurements, it's now time to look for an updated patio door lock. Online, you can find a wide range of top-quality locks. A lot of the top brands offer sophisticated security features that safeguard your home. Choosing the right lock is an investment in your home's safety, so it's important to research and read reviews prior to making a purchase. Make sure to keep your locks clean to keep debris and dirt from blocking your doors.
Make sure to examine the screw holes
Patio doors are an essential aspect of the security of your home. They should be checked for signs of wear to ensure they function properly. Over time, the locks and spindle that connect your interior and exterior handles may need to be replaced. A durable lock is not just a barrier to unwanted entry, but also increases the efficiency of your energy, safety and security.
There are many ways you can narrow your search for a new lock, if you don't have the specific type. To begin with, determine the type of keyway used. Aluminum patio doors are usually equipped with a rectangular cutout mortise lock as well as E2126 or E2079 locks are installed inside a recess in the frame. Uploading a picture of the lock with your digital camera can help determine the type of lock you have.
You can also determine the kind of lock by looking at the screw holes. The majority of sliding patio door locks have screw holes that align with the latch keeper mounted on the side jamb, but they're not always the same. Some screws are longer than others, or have different threaded finishes. Some screws have washers or a hexagonal nut attached that can alter the way they fit into the lock hasp.
Once you know what kind of lock your home has, you can start making plans to replace it. First, you'll want to clean the lock with a soft cloth or brush to get rid of any debris or dirt that could be affecting its operation. Once clean, you can apply a silicone-based lubricant to keep the locking mechanism in good shape and quiet.
Afterwards, it's a good idea to replace the old screws with more long ones. This will help you get more grip and install the lock with less effort. Once you've finished, it's a good idea test the handle and observe how the latch engages inside the lock.
If the hasp isn't engaging it, you may need to add an hex-nut or washer behind it to help it catch more of the lip of the door. You can place an shim on the sides of the lockkeeper on the jamb to see if it helps.
Check the Lock Snib
The snib, or lock mechanism, is situated in the handle of the door. It is possible to engage and deengage the snib to open and close your patio doors. It's the first thing you should check when your locks aren't functioning correctly. You can also inspect the keepers (located at the top and bottom of the door frame) to determine if they are loose or have a misalignment that could cause them to shred. Make sure that your snib is seated properly and that the lock isn't stuck or blocked in any way.
The most common patio door locks are steel mortise latches that hold your sliding glass doors in place. They're installed in the door frame and are available in various styles and designs, making them a reliable security measure. Some are designed to fit keys, while some have an oval cutout for simple locking and unlocking.
A step-on lock that is a thumb screw is a different option. It keeps your sliding door in place without having to turn the knob. These locks are often found on older metal-framed patio doors, but could be a great choice for securing vinyl or wood-framed sliding doors too.
When you're looking at your current patio door lock, make a note of the type and size of the screw holes it uses to fix the escutcheon plate and body of the lock. This will help you select the replacement lock that has appropriate screw holes to fit your specific patio door hardware. It's a good idea also to inspect your strike plate to make sure it's properly secured.
If you own Jason Windows boltlock sliding doors from 2000-2009, make sure the keeper screws are secured and not loosened or missing. These screws hold the snib partially open in "vent" mode, which allows airflow while promoting security. They are also essential to prevent your lock from being cut. All locks must be inspected and cleaned regularly to keep dirt, dust, corrosion, or debris from obstructing their operation.
If your snib is damaged you might be able to replace the entire strikeplate and the snib. However, if your snib is just misaligned, you can easily fix it yourself by taking off the strike plate using the help of a putty knife. Then, back out the adjustment screw (located above and below the screw) to move the strike plate up or down until the engagement tongue aligns with the Milgard logo on the snib.